Update from Paul S.:
"I have checked out your headlight situation, and it appears that your headlight socket is faulty. It is grounding out somehow. I'm not really sure how it is possible, but it is doing it. The light works when I just put the wires to the bulb, but everything grounds when I put the bulb in the socket. I guess you need a new socket. I'm hoping to tear into the clutch this weekend."
I have emailed ScooterWorks to see if they will honor a warranty on that part. Waiting to hear back from them.
Wednesday, 29 July 2009
Soda blasting and powder coating in East Bay San Francisco
I have been in contact with Aidan, a fellow LCUSA member, and we have been hunting for a local soda blaster. I posted the question on LCUSA's forum and Guillermo of Lambretta Works suggested"Leons Powder Coating" in Oakland, CA. I emailed the Leon Family for the following estimate(s):
Hello Leons Family,
I am restoring a 1962 Italian Lambretta motorscooter. It is all metal. There are three things I'd like to you if (1) you do, (2) what the ball park estimate is, and (3) what type of turn around can I expect?
---------- Projects ----------
1) I need to have two engine (3/4s the size of lawn mower engine) cases soda blaster. I have a friend who may also wish to do one to two of his engines at the same time if we can get a "batch" rate on the job.
2) My scooter will require some very light body work straightening out two to four panels of the body.
3) I would like to have my entire scooter body prepped and painted in two colors. It would look like this:
http://www.smellofdeath.com/lloydy/images/Jays_tv175_1.jpg
This may serve as a point of reference:
http://lambrettarestoration.blogspot.com/2007/10/vision-for-when-all-is-said-and-done.html
The majority of the parts are quite small.
In coral red (Lechler system colors #8065)
fork, frame, leg-shield, handle bar and headset, floorboard tunnel, wheel hubs, front disc brake backing plate, wheel rims, spare wheel holder, glove box lid, tail-light body, fuel tap hatch, stand, stand mudguard, right-hand rear running board L-bracket air intake (beneath saddle), side-panels, front cowling, horn grille, and front mudguard (fiberglass).
In new white (Lechler system colors #8059):
fuel tank, rear mudguard, cylinder head, air intake manifold (2 pieces), glove box, air box, filter carrier, fuel tank support strap, and battery support strap.
---------- ---------- ---------- ----------
I recognize I provided an abundance of information, but I figured too much is better than two little). I suspect it is possible that you have also done some work on vintage Lambretta scooters as well. Guillermo of Lambretta Works says you guys do great work.
Note: I will post the response. I am very close to being ready to soda blast my engines.
Hello Leons Family,
I am restoring a 1962 Italian Lambretta motorscooter. It is all metal. There are three things I'd like to you if (1) you do, (2) what the ball park estimate is, and (3) what type of turn around can I expect?
---------- Projects ----------
1) I need to have two engine (3/4s the size of lawn mower engine) cases soda blaster. I have a friend who may also wish to do one to two of his engines at the same time if we can get a "batch" rate on the job.
2) My scooter will require some very light body work straightening out two to four panels of the body.
3) I would like to have my entire scooter body prepped and painted in two colors. It would look like this:
http://www.smellofdeath.com/lloydy/images/Jays_tv175_1.jpg
This may serve as a point of reference:
http://lambrettarestoration.blogspot.com/2007/10/vision-for-when-all-is-said-and-done.html
The majority of the parts are quite small.
In coral red (Lechler system colors #8065)
fork, frame, leg-shield, handle bar and headset, floorboard tunnel, wheel hubs, front disc brake backing plate, wheel rims, spare wheel holder, glove box lid, tail-light body, fuel tap hatch, stand, stand mudguard, right-hand rear running board L-bracket air intake (beneath saddle), side-panels, front cowling, horn grille, and front mudguard (fiberglass).
In new white (Lechler system colors #8059):
fuel tank, rear mudguard, cylinder head, air intake manifold (2 pieces), glove box, air box, filter carrier, fuel tank support strap, and battery support strap.
---------- ---------- ---------- ----------
I recognize I provided an abundance of information, but I figured too much is better than two little). I suspect it is possible that you have also done some work on vintage Lambretta scooters as well. Guillermo of Lambretta Works says you guys do great work.
Note: I will post the response. I am very close to being ready to soda blast my engines.
Update: July 31, 2009.
I am beginning to research the prep and paint process of my scoot.
I considered soda blasting the engine cases, but am now looking into vapor/dry ice blasting, because there is no clean up of the cases and it is supposed to be a lot cheaper.
For powder coat I have turned up:
I am in discussions with Leons Powder Coating & Sand Blasting now. $250 quote for major parts and small parts will be extra. I am trying to find out the cap on the entire bike for media blast and powder.
I just spoke with Curtis of Melrose Metal Finishing in East Bay. He quoted me $1200 cash (I asked him to HIGH ball his quote and he did) to medium blast and powder in two colors using the RAL system or paint chip. He said the bike must be delivered with all body work done and ready to be blasted and painted. He has worked on motorcycles before. He does not want to powder coat the gas tank, because the heat and the seams of the tank. He would rather liquid paint this. He really recommended going with wet paint if there is a body work to be done.
A few months back a local club member, Mike C., was telling me how impressed he was with the knowledge of powdering a scooter from a phone call he had with West Coast Powder Coating in South San Francisco. He was quoted $1000 for the whole Lambretta. He didn't end up using him, but he said it sounds like this guy knows what's up.
Live long and prosper
Este verão tem trazido algumas boas noticias para o scooterista, da capital e não só. Do estacionamento em Lisboa à aprovação da legislação das 125, motivos não parecem faltar para que, finalmente, algumas pessoas se entusiasmem a dar o salto para as duas rodas. O aumento do numero de utilizadores trará inegáveis benefícios (inclusive de segurança) para todos, ao criar mais visibilidade para esta nossa minoria, tantas vezes desprezada pelo legislador e pelos outros utentes da via.
As marcas já redobraram esforços na publicidade, sobretudo aos seus modelos de 125 centímetros cúbicos de cilindrada, esperando conseguir em Portugal o espectacular aumento de vendas que legislação similar produziu noutros países europeus. Isto numa altura em que a lei ainda nem foi promulgada. Mas não há nada de errado com isso, é importante que a mensagem passe. Temo no entanto pelo futuro destes novos condutores. Se tirando a carta uma pessoa sente que é literalmente atirada aos lobos, sem ter formação prática nenhuma os riscos serão ainda maiores.
O meu actual percurso diário casa-trabalho e trabalho-casa não soma mais de uma vintena de quilómetros, a maior parte deles por zonas de boas estradas, bem sinalizadas e com limites de velocidade entre os 70 e os 40 km/h. Mesmo assim, a quantidade de asneiras que observo diariamente é tremenda, com tendência para aumentar com o maior volume de tráfego que a zona da linha tem de suportar nesta época do ano. Excesso de velocidade, manobras perigosas, desrespeito pela sinalização vertical e luminosa, circulação em sentido proibido, o A-B-C do automobilista português está demasiado presente no meu dia-a-dia. Naturalmente, as consequências também: não houve dia desta semana em que eu não presenciasse pelo menos um acidente, ou as suas sequelas.
No meio dos vidros partidos, da chapa amolgada, dos animais atropelados e deixados à sua sorte, recordo sobretudo um acidente há dois dias, envolvendo uma mota. No caos, na azafama dos condutores a tentarem contornar mais este empecilho que os fazia perder uns segundos na sua corrida até ao semáforo seguinte, apercebi-me de que se tratava de uma pequena GN 250 ou a semelhante CM 125. Uma mota de instrução. Não muito longe do motociclo deitado por terra, estavam imobilizados um carro de uma escola de condução, e um outro veiculo. O instrutor, fora da viatura, fazia nervoso uso do telemóvel, enquanto não muito longe, a sua aluna, sentada no asfalto, ainda com o capacete colocado, era confortada por alguém.
Conseguem imaginar o desanimo desta jovem, deitada ao chão na própria aula de condução? Não faço ideia das lesões, mas ela parecia bastante queixosa. Estatisticamente a imensa maioria destas colisões tem consequências físicas. Eu sei disso. Chegará ela alguma vez a concluir as aulas? Voltará sequer a subir a um veículo de duas rodas?
Tenham cuidado aí fora.
Tuesday, 28 July 2009
Lambretta tools by Dien Nguyen
My father-in-law has 30 plus years experience as a professional welder and when it come to fabricating most things he can do it. Hell, he redid our entire kitchen in our previous home. He's got mad game when it comes to "projects". I cashed in yet again with him this July (2009). Mr. Nguyen is a refugee from Vietnam and escaped the fall of Saigon with less than 24 hours before it fell. He tells my wife and I stories of his love of Lambrettas when he was younger. He said that Vespas were for old people in Vietnam and young rode Lambrettas. He loves Lambrettas. We went for a ride together a few years back and he can ride too.
Anyhow, I showed him pictures and measurements of a clutch compressor I borrowed from Dano of FLCSC in Oakland and this is what he made me (note that Dano's is in back of mine):
I ended up with a professional quality clutch compressor for free made from scraps at my father-in-law's work. I am pretty damn happy.
I wasn't overly worried about polishing mine, but I did grind/sand down the tip of the bolt so as it would not hurt the scoot itself. An alternative design can be found here. It would look something like this.
Another tool he made for me was the con-rod tool. Mr. Nguyen followed Jim M.'s design on this one. I can grind the inside smooth no problem, but to be honest it may not be necessary. Crude looking tools that function properly do not bother me at all as long as they do not hurt the scoot. A crude looking restoration is what would bother me.
Thanx Bo (dad in Vietnamese). As usual I owe you one!
Anyhow, I showed him pictures and measurements of a clutch compressor I borrowed from Dano of FLCSC in Oakland and this is what he made me (note that Dano's is in back of mine):
I ended up with a professional quality clutch compressor for free made from scraps at my father-in-law's work. I am pretty damn happy. 
I wasn't overly worried about polishing mine, but I did grind/sand down the tip of the bolt so as it would not hurt the scoot itself. An alternative design can be found here. It would look something like this.
Another tool he made for me was the con-rod tool. Mr. Nguyen followed Jim M.'s design on this one. I can grind the inside smooth no problem, but to be honest it may not be necessary. Crude looking tools that function properly do not bother me at all as long as they do not hurt the scoot. A crude looking restoration is what would bother me.
Thanx Bo (dad in Vietnamese). As usual I owe you one!
Dance Craze em Almada Velha
Estão de regresso as Dance Craze, a próxima vai acontecer no dia 8 Agosto no bar Acercadanoite em Almada Velha a partir das 22h. Os selecters de serviço serão o Mod 64 e Pedro "42" Ferreira, ambos nossos conhecidos e com bom gosto musical.
Precisa-se para Videoclip dos Ratazanas, 6 Scooterboys c/ Vespas ou Lambrettas!!
Precisa-se para Videoclip dos Ratazanas, 6 Scooterboys c/ Vespas ou Lambrettas!!
Os Ratazanas vão gravar o seu 1º videoclip do tema "Grandma DJ" e procuram 6 Scooterboys e as suas respectivas maquinas para participar no mesmo.
As filmagens vão decorrer neste próximo sábado dia 1, a partir das 12h em Oeiras, numa vivenda junto ao Centro Comercial Palmeiras. Haverá comida e bebida e música dos Ratazanas!!
Para confirmar a vossa presença/mais detalhes entrem em contacto com a produção:
Joana Mendes
214073515 - 969171721
Para ouvirem a música dos Ratazanas...
www.myspace.com/theratazanas
Graver, abre loja na Baixa
Já se encontra aberta ao público a Graver Shop. Nesta loja situada bem no centro de Lisboa podes encontrar muita roupa e acessórios de marcas como: Dr. Martens, Fred Perry, Ben Sherman, Merc, Lambretta, Warriors, entre outras. Parece que brevemente também irão ter à venda material da Lonsdale. A morada é: Rua da Madalena, nº 80 - Loja D/F - 1100-322 Lisboa. O horário de funcionamento é o seguinte: Das 10h00 às 19h00. Período de almoço das 14h00 às 15h00. O site online e o mail são: www.graver.pt - info@graver.pt
Subscribe to:
Posts (Atom)