Floor rail rubber is AVAILABLE

Hot off the press from my email:

Good afternoon,

The black rubber for the floor rail for your VSC is our code G2020 and it cost 15.00€.
Shipment cost for USA is 12.00€.
I can send you the parts by post.
The payment is by credit card.
For the payment I need those details of your credit card:
1. your name and surname 2. the 16 numbers in front of the credit card
3. the numbers behind the credit card (code CVV2)
4. the date of expiration

You can write me an e-mail or a fax (0039 0544 502079).

I' m waiting for a your answer.
Thanks,
Pascoli Mauro

Mauro Pascoli

Mauro Pascoli srl
Via Faentina 175/a - Centro MIR
48100 Fornace Zarattini - Ravenna,
C.F./P.IVA 01451600397
tel. 0544/502078 - fax. 0544/502079

NOTE: I will speak with Lisa and see if she wants a $50 brand new kit for the Rally or if she wants me to clean up the original kit and pay $30 for the rubber and $24 for the shipping. I need to keep in mind that this is Lisa's bike and the goal is for her to be happy with it and pleasing myself by not using any new parts. The reality is this bike will be a "babied" scoot that is "ridden" and used. This has never been a museum restoration. It has always been my wife's bike and lucky for me, she doesn't get hung up or give a crap what purists and others have to say about her bike. She tell them where to stick it. Me, on the hand, I am beating myself up over this, the holes in the cowl, and the seat. I hate mistakes. Please, as always, learn from my errors!

Rally floor rail kit install instructions

If you already have paint on your scoot and you're installing a new floor rail kit . . . Paul C. emailed me a great suggestion for not screwing up your paint and retrofitting the SS 180 with Rally 200 floor rails.

From Paul C. . . .
pascoli kit are the correct width ,the rally ones are a bit narrower and the rubber has less ribs in them,if youre carefull the rally kit can be fitted without paint damage (if youre carefull, ) cover the paint in gaffa tape and bolt them down to take shape leave them for a while , then use the kit rivits one at a time to replace the bolts, make a tool fron a punch and use a die grinder to make a small circular bowl in end then spend some time polishing the bowl to avoid leaving marks in the end cap rivits .hit the rivits gently 20-30 times to spread the heads, they will go eventuly,but dont wack them , two people make the job much easier, dont bolt them down as a final fit, it looks like you dont have the guts to hit youre new paint with a hammer, you could use skate board sex bolts at a push. good luck

THANX PAUL C.