Odds and ends to tackle

TO PURCHASE:

With part numbers:
97570 - Clip for cables
84224 - Gas on/off lever
83139 - Tube for gas on/off lever (is this something I need to have special or can I use my own tube)
S. 8431 - Screws for fixing horn (qty: 4)
S. 8088 - Spring for fixing horn
97523 - Pin to secure (QTY: 2)
90528 (?) - Grommet to go around the glove box door

Without part numbers:
- 6v-.06W Speedo bulb (looks like a fuse) for a Rally speedo
- 6v-3W Pilot bulb for a Rally 180 headset
- Terminal connector for the pilot bulb where black wire connects to fuse looking bulb (I have one side, but am missing the other. I can provide a pix if necessary)
- Tail light grommet for outside of "Tractor" taillight – it does not go in with the lens. (It goes between the metal housing and bracket. I have pictures if needed.
- VSD Headlight bezel outer screw (goes inside the other screw) (Qty: 2)
- Speedo tip clamp to keep the cable slipping out of the lock nut at the front hub
- 3.5x10 innertube
- Spark plug connector (I have a new wire and old grommet, but my spark plug stands way too high!. Is it possible to get a ball-bearing locking kind that is EXTREMELY close to the head of spark plug so that it is not too high up and hitting the inside of the cowl).

QUESTIONS TO LOOK INTO IN:
- Does the carb need tuned? It stalled a bit.

- Why did the horn stop working? The kill switch didn't work. The tail light didn't work. What came loose?

- Do I have the rear brake pedal switch wired backwards? The wires still need to be clamped down.

- How should the spark plug wire be positioned?

- How should the wired harness be positioned around the engine.

- Why doesn't steering column lock work?

- Why doesn't headlight bulb fit inside my headlight (part# 114345 VSD headset)?

TO DOES:
- Reverse rims to be put on correctly.

- Confirm if rear brake switch should be open or closed, i.e. do I have the correct one?

**** Expect new posts soon.